General Jumbo Clev Weld Wheel Restoration

Restoration of these Clev Weld wheels is a complicated process and many hours have gone into the restoration. We have them almost ready for the first copper plating. We have taken them apart, cleaned them, installed 1/4 inch nutserts, installed them back in the rims and installed two of them in wider rims. We used countersink screws to hold them in the rims. We welded the lug bolt centers back into the spoke centers on a lathe to insure proper alignment and welded the adapter rings on the face so they would receive the General Caps, because none of the Goodrich caps were ever reproduced.